Epoxy Coating Dose Pots with Tundish Pn16
|FOB Price:||US $15 / Piece|
|Min. Order:||100 Pieces|
|Min. Order||FOB Price|
|100 Pieces||US $15/ Piece|
|Payment Terms:||L/C, T/T, D/P|
- Model NO.: DP002
- Filter Number: 1
- Efficiency: F5
- Type: Folded Filter
- Transport Package: Poly-Wooden Cases
- Origin: China
- Clapboard: without Clapboard
- Medium Material: Stainless Steel Mesh
- Filtration Grade: Medium Filter
- Trademark: SDK
- Specification: DN50-DN200
Customer Question & Answer (0)
Dosing Pots can be supplied complete with all valves & fittings if required.
Closed re-circulating water systems (chilled or hot water) can be simply dosed on a regular / manual basis by use of these dosing pots. Fitted across flow and return lines, they provide a means to annex a portion of the system water which can be drained away and replaced with the chemical to be dosed. When re-connected to the system, the chemical is flushed through.
The dosing pots are fitted with large 1" valves, which ensure quick and easy action of the pot even in low flow/pressure conditions. An air vent valve enables the pot to be purged during filling thus eliminating undesirable air ingress to the system. A NRV check valve is fitted into the fill line below the tundish.
Dosing pots are required in order to feed liquid chemicals such as corrosion inhibitors into closed systems
If required,The dosing pots can be supplied along with a mild steel vessel with inlet (return) and outlet (flow) valves, a drain valve and a filling valve. A steel tundish, air release valve, wall mounting brackets and a non-return valve.
- Mild steel shell to BS 1387 (up to 150mm, schedule 20 used on 200mm and above)
- Welded to BS EN 287
- Powder coated paint finish.
|Clean vent and dose pots|
|Pipe type||seam & seamless|
|Length||as per required|
|Surface finish||Anti-rust oil,lacquer painting,Epoxy coating|